Front Connections
VSUP |
DC Power Supply Input - Requires a +8 to +25 Volt DC supply. (connects directly to Power Input socket on rear, either can be used) |
|
GND |
Ground (connects internally to all other GND terminals) |
|
5V OUT |
+5 Volt Supply Out - Can supply up to 0.5 amps (also used to supply the EXT BUS PORT) |
|
GND |
Ground (connects internally to all other GND terminals) |
|
GND |
Ground (connects internally to all other GND terminals) |
|
DI1 |
Digital Input 1 (diode protected) |
|
DI2 |
Digital Input 2 (diode protected) |
|
DI3 |
Digital Input 3 (diode protected) |
|
DI4 |
Digital Input 4 (diode protected) |
|
DI5 |
Digital Input 5 (diode protected) |
|
DI6 |
Digital Input 6 (diode protected) |
|
DI7 |
Digital Input 7 (diode protected) |
|
DI8 |
Digital Input 8 (diode protected) |
|
GND |
Ground (connect to all other GND terminals) |
|
AI1 |
Analog Input 1 |
|
AI2 |
Analog Input 2 |
|
AI3 |
Analog Input 3 |
|
AI4 |
Analog Input 4 |
|
AI5 |
Analog Input 5 |
|
AI6 |
Analog Input 6 |
|
GND |
Ground (connects internally to all other GND terminals) |
|
1-Wire |
1-Wire Bus |
|
GND |
Ground (connects internally to all other GND terminals) |
|
VS-A |
G R O U P
A |
+Supply Input for Group A Digital Outputs (DO1-DO4 |
DO1 |
Digital Output 1 (diode protection for inductive loads) |
|
DO2 |
Digital Output 2 (diode protection for inductive loads) |
|
DO3 |
Digital Output 3 (diode protection for inductive loads) |
|
DO4 |
Digital Output 4 (diode protection for inductive loads) |
|
Rear Connections
GND |
Ground (connects internally to all other GND terminals) |
|
VS-B |
G R O U P
B |
+V Supply Input for Group B Digital Outputs (DO1-DO4) |
DO5 |
Digital Output 5 (Group B, diode protection for inductive loads) |
|
DO6 |
Digital Output 6 (Group B, diode protection for inductive loads) |
|
DO7 |
Digital Output 7 (Group B, diode protection for inductive loads) |
|
DO8 |
Digital Output 8 (Group B, diode protection for inductive loads) |
|
ETHERNET |
Ethernet Port (standard RJ45 socket) |
|
RS232 SERIAL PORT |
RS232 Serial Communications Port (standard Female 9 Pin DIN connector) |
|
EXT BUS PORT |
Extension Bus Port (high speed serial bus for future expansion) |
|
PWR IN VSUP |
DC Power Supply Input - Requires a +8 to +25 Volt DC supply. (2.1mm barrel-style power socket, centre pin is the +ve input, outer is connected to GND) (connects directly to Power Input terminal 'VSUP' on front, either can be used) |
|